How Turbo Chargers Works
The turbo charger is bolted to the exhaust manifold of the engine. The exhaust from the cylinders spins the turbine within the turbo charger, which works like a gas turbine engine. The turbine is connected by a shaft to the compressor, which is located between the air filter and the intake manifold. The compressor pressurizes the air going into the pistons.

The exhaust from the cylinders passes through the turbine blades, causing the turbine to spin. The more exhaust that goes through the blades, the faster they spin.

On the other end of the shaft that the turbine is attached to, the compressor pumps air into the cylinders. The compressor is a type of centrifugal pump -- it draws air in at the center of its blades and flings it outward as it spins.

In order to handle speeds of up to 150,000 rpm, the turbine shaft has to be supported very carefully. Most bearings would explode at speeds like this, so most turbo chargers use a fluid bearing. This type of bearing supports the shaft on a thin layer of oil that is constantly pumped around the shaft. This serves two purposes: It cools the shaft and some of the other turbo charger parts, and it allows the shaft to spin without much friction.

Click here for details of Turborevs Turbo kits

Turborevs specializes in providing customers with the very best in car accessories. From HID conversion kits, DTM Mirrors, Dump Valves to suicide door kits, we have an amazing selection of quality car parts and accessories. If you're looking to breathe new life into your car, MPV, or 4X4, shop online at Turborevs.